That changes with Phillips Connect’s new integration with McLeod Software. 

The Gap That’s Been Costing Fleets 

Ask any fleet planner how they decide which trailer to assign to a load, and you’ll often hear the same answer: they check what they can find, make a few phone calls, and hope for the best. That’s not a technology problem. It’s a data problem. The information needed to make a smart decision — where is the trailer, how much space is left, is it mechanically ready to roll — has simply not been available inside the systems dispatchers and planners actually use. 

That gap shows up in empty miles, underutilized capacity, and loads that sit longer than they should. It shows up in the time planners spend chasing information instead of moving freight. And it shows up in the customer experience when a committed load can’t be confirmed because no one really knows what’s available. 

Trailer Intelligence Where It Belongs 

The Phillips Connect integration with McLeod Software puts smart trailer data directly inside the McLeod TMS – no separate app, no manual data pulls, no switching between platforms. Fleet planners and dispatchers gain real-time visibility into trailer location, tire health, brake and lights status, and, critically, what’s actually inside the trailer and how much capacity remains. 

That last capability, powered by Phillips Connect CargoVision, is where trailer intelligence takes a meaningful step forward. CargoVision uses an AI-powered camera to show exactly what’s loaded in a trailer and delivers volumetric measurements that support accurate load planning. For partial shipments, multi-stop routes, or any operation where load matching matters, this level of detail transforms the trailer from an unknown quantity into a capacity-aware asset. 

MNS1, the first fleet to complete the integration, saw the difference immediately. “Our planners and dispatchers can see inside every trailer, understand how much space is left and decide quickly which trailers are ready to deploy, and which need to be repositioned,” said Mike Narkys, President of MNS1. “The Phillips Connect integration with McLeod helps us turn loads faster, reduce empty moves and put our trailers to work where they make the most impact for our customers and our drivers.” 

More Than Location — A Full Trailer Picture 

What distinguishes this integration is the breadth of intelligence it delivers. Many connected vehicle solutions stop at location. Phillips Connect surfaces the full health and status picture of every trailer: tire condition, brake performance, lights — the mechanical readiness indicators that determine whether a trailer is actually ready to move. Combine that with cargo intelligence and volumetric load data, and fleets gain something they haven’t had before: a complete, real-time view of every trailer’s operational status, all inside the platform they already run their business on. 

“With the Phillips Connect integration, mutual customers gain cargo visibility and real-time trailer location inside McLeod,” said Ahmed Ebrahim, Senior Vice President of Strategic Partnerships and Integrations at McLeod Software. “This provides our customers with stronger insight into their networks and helps them plan more effectively across their fleet.” 

The First of Many 

This integration is the opening move in a broader Phillips Connect platform strategy. The goal is to meet fleets where they already work — not ask them to adopt another standalone system, but to bring smart trailer intelligence into the TMS, fleet management, and operational platforms they depend on every day. 

“Trailers become active contributors to fleet strategy when data such as tire, lights and brake health, cargo intelligence, and location are accessible in the platforms they already rely on,” said Todd Hodges, Director of Product Management for Phillips Connect. “This integration is the first of many that will help fleets bring their trailer intelligence forward, no matter what software platforms they use to run their business.” 

For fleets running McLeod across North America, the integration is available now. For the broader industry, it represents a clear direction: trailer data belongs in the operational core of fleet management, not siloed in a separate tool. 

The trailer has always been essential. Now it’s finally visible. 

Phillips Connect helps fleets maximize their ROI on every trailer, every load, and every mile. Learn more at phillipsconnect.com. 

The post Your TMS Knows Your Trucks. Now It Knows Your Trailers.  appeared first on Phillips Connect.

NASHVILLE, Tenn. – March 15, 2026 – Phillips Connect today announced new enhancements across three key trailer system categories that expand how fleets manage roadside safety, brake performance and liftgate operations. Introduced at the Technology & Maintenance Council (TMC) Annual Meeting & Transportation Technology Exhibition, the updates strengthen how fleets capture operational intelligence from critical trailer systems and distribute those insights across maintenance, operations and safety teams. 

“Every system on the trailer generates insights that can help fleets operate more safely and efficiently,” said Mark Wallin, general manager and senior vice president of product at Phillips Connect. “Our platform is designed to capture those signals and turn them into actionable insights. By working closely with leading equipment providers, we can also deliver deeper intelligence from systems fleets already rely on across their trailers.” 

Phillips Connect Roadside Safety Intelligence 

Phillips Connect introduced new Roadside safety solutions designed to improve visibility and awareness during roadside events. 

Through a partnership with Emergency Safety Solutions (ESS), the Phillips Connect platform can trigger ESS’s H.E.L.P. DeliverSAFE intelligent roadside hazard technology when a trailer is stopped on the shoulder. When a driver activates the trailer’s hazard lights, the system automatically initiates H.E.L.P. Lighting Alerts, flashing the trailer’s lights in a distinctive high-visibility pattern designed to attract more attention than standard hazard lights. The system also sends real-time shouldered vehicle alerts to approaching motorists through navigation apps and in-dash systems, helping drivers identify roadside hazards earlier and move over more safely. 

Roadside safety intelligence builds on Phillips Connect’s existing light circuit monitoring technology, extending its functionality to improve roadside awareness and help protect drivers, equipment and freight during roadside events. 

Phillips Connect Brake System Intelligence 

Phillips Connect also added system enhancements to its existing brake solutions that provide greater visibility into trailer brake performance and status. 

When fleets operate trailers equipped with Bendix TABS Advanced brake system electronic control units (ECUs), Phillips Connect can access diagnostic trouble code (DTC) fault reporting and standard formatted data messages. This information includes brake wear, trouble codes and other system data that may help maintenance teams detect developing issues and prioritize service before they escalate. 

Phillips Connect can provide fleets access to insights from this data that strengthen cultures of safety by enabling fleets to respond more quickly to events such as roll stability activation or braking faults that may require attention. 

Phillips Connect Liftgate Intelligence 

Phillips Connect also enhanced its liftgate solutions to provide fleets with improved liftgate performance and usage data. 

Liftgates are essential to many delivery operations, particularly on routes with frequent stops or locations without loading docks. When fleets operate Maxon liftgates equipped with MAX LINK technology, Phillips Connect can provide fleets with deeper insight into liftgate activity, system health and performance through its partnership with Maxon. 

This information helps fleets identify potential liftgate issues earlier and avoid delivery disruptions that can occur when liftgate batteries or hydraulic systems stop functioning properly. 

Expanding the Connected Trailer Ecosystem 

These enhancements reflect Phillips Connect’s broader strategy to capture operational intelligence from the systems already installed across the trailer. 

By supporting deeper data visibility from leading equipment and solutions providers, Phillips Connect enables fleets to monitor critical trailer systems while continuing to operate the equipment and technologies they already rely on. 

Phillips Connect will showcase these technologies at TMC in Nashville, March 16–18. Show attendees can learn more about the company’s smart trailer platform and see the latest innovations in connected trailer intelligence at the Phillips Connect booth 2029. 

About Phillips Connect 

Phillips Connect develops smart trailer technology that helps fleets capture and apply intelligence from across the trailer. Its platform brings together sensors, cameras and integrated systems to provide visibility into trailer operations, equipment health and cargo activity. By turning trailer intelligence into operational insight, Phillips Connect helps fleets improve safety, increase uptime and operate more efficiently. 

Founded in 2017 and headquartered in Irvine, California, Phillips Connect develops technology that helps fleets monitor trailer systems, identify issues earlier and make better decisions by making trailer intelligence accessible across the fleet. Learn more at www.phillips-connect.com. 

The post Phillips Connect Expands Trailer Intelligence Across Roadside, Brake and Liftgate Systems  appeared first on Phillips Connect.

NASHVILLE, Tenn. – March 15, 2026 – Phillips Connect today announced new platform enhancements designed to expand how fleets capture and use trailer intelligence across their operations. Introduced at the Technology & Maintenance Council (TMC) Annual Meeting & Transportation Technology Exhibition, the updates improve visibility into trailer activity, cargo operations and trailer performance while making it easy for fleets to benefit from smart trailer intelligence even if they rely on another provider for GPS location tracking. 

“Track-and-trace GPS units have long been the baseline for trailer visibility, but fleets need more than location to make informed decisions that affect operations, safety, dispatch, compliance and maintenance,” said Mark Wallin, general manager and senior vice president of product at Phillips Connect. “The next generation of connected trailer technology is already here, enabling fleets to capture intelligence from across the trailer and supply those insights to every role in the fleet.” 

JumpStart Expands Trailer Intelligence Beyond Location 

Phillips Connect announced JumpStart, a new offering designed to help fleets quickly begin capturing smart trailer insights beyond basic location tracking.  

Track-and-trace telematics providers deliver simple trailer GPS location but typically cannot capture operational intelligence from critical trailer systems. Without insight into how equipment is being used and performing, fleets have limited information to support operational, maintenance and safety decisions.  

Even if fleets are capturing location data from another provider, JumpStart provides easy access to smart trailer insights through six entry points: automated TrailerID, cargo intelligence, brake systems, tire health, liftgate performance and temperature monitoring. Fleets can start with any of these systems and expand over time as they add more smart trailer insights.  

Phillips Connect CargoVision Adds People Detection Inside the Trailer 

Phillips Connect introduced People Detection, a new enhancement to its CargoVision platform that identifies when individuals enter or exit the trailer cargo area. The enhancement gives fleets greater awareness of activity inside the trailer during loading, unloading and other operations. CargoVision with People Detection also helps fleets detect unauthorized access, identify potential cargo theft and safety risks, and better understand how trailers are being used throughout the day. 

Driver Behavior Insights Provide Visibility into How Trailers Are Operated 

Phillips Connect also added Driver Behavior Insights to its platform, helping fleets understand how their trailers are being operated on the road. Using smart sensor data from the trailer, the Phillips Connect platform detects events such as harsh braking, aggressive acceleration and sharp cornering. These insights provide visibility into driver behavior even when trailers are being pulled by third-party tractors.  

This visibility is particularly valuable for fleets that rely on leased equipment, independent carriers or drop-and-hook operations, where trailer owners may not have direct access to tractor telematics. By identifying unsafe operating patterns earlier, fleets can better protect cargo, equipment and their brand on the road. 

Building the Next Generation of Trailer Intelligence 

These innovations reflect Phillips Connect’s broader strategy to capture operational insights from across the trailer and make them easier for fleets to use in their daily operations. 

By combining sensor data, visual intelligence and behavioral insights within a single platform, fleets can move beyond simple location tracking to gain a deeper understanding of how trailers are being used, maintained and operated across their networks. 

Phillips Connect will showcase these technologies at TMC in Nashville, March 16–18. Show attendees can learn more about the company’s smart trailer platform and see the latest innovations in connected trailer intelligence at the Phillips Connect booth 2029. 

About Phillips Connect 

Phillips Connect develops smart trailer technology that helps fleets capture and apply intelligence from across the trailer. Its platform brings together sensors, cameras and integrated systems to provide visibility into trailer operations, equipment health and cargo activity. By turning trailer intelligence into operational insight, Phillips Connect helps fleets improve safety, increase uptime and operate more efficiently. 

Founded in 2017 and headquartered in Irvine, California, Phillips Connect develops technology that helps fleets monitor trailer systems, identify issues earlier and make better decisions by making trailer intelligence accessible across the fleet. Learn more at www.phillips-connect.com. 

The post Phillips Connect Introduces Platform Enhancements for Connected Trailers  appeared first on Phillips Connect.

On paper, that step sounds simple. In real life, it happens in busy yards, under time pressure, sometimes at the end of a long day. It’s one more screen, one more confirmation, one more opportunity for something to be entered incorrectly. And when it is, the consequences rarely stay in the cab. 

If the wrong trailer is associated with a trip, that mismatch can affect Hours-of-Service logs, trailer inspection records, dispatch visibility, load security, and even the timing of billing. A small moment at hookup can ripple across compliance, planning, operations, and finance. 

Phillips Connect TrailerID was designed to remove that friction. Instead of relying on manual selection, TrailerID automatically identifies the connected trailer at the moment it is physically hooked. Drivers do not have to choose it. They do not have to confirm it. The system reflects what actually happened. 

That change may feel minor in the cab, but it has a meaningful impact across the fleet. When trailer identification happens automatically, compliance records stay aligned with the equipment being pulled. Dispatch and planning teams can see which trailer actually left the yard. Security teams have clearer insight into when and where trailers were connected and dropped. Billing can begin based on verified events rather than waiting for follow-up. 

Under the hood, TrailerID relies on a tightly integrated hardware and software platform that detects the physical tractor-trailer connection, rather than estimating movement based on proximity alone. Drivers experience the benefit automatically through DriverAssist or integrated in-cab platforms like Geotab and Platform Science, while operations teams see the same confirmed events in Connect1. Everyone works from the same record of what actually happened. 

For drivers, the benefit is straightforward: one less manual step in a job that already demands focus. For fleets, it means fewer corrections, fewer assumptions, and a clearer picture of how trailers are moving through the network. 

Sometimes the most meaningful improvements are not flashy features. They are the quiet changes that remove friction, simplify the day, and make the rest of the operation run a little more smoothly. 

The post One Less Thing for Drivers to Worry About  appeared first on Phillips Connect.

What you need to know 

• Phillips Connect TrailerID automatically confirms which trailer is connected, removing manual trailer selection from daily driver tasks 
• Accurate trailer identification supports compliance, job execution, load security, and billing without adding steps for drivers
• TrailerID combines tightly integrated hardware and software to deliver dependable trailer identification fleets can rely on 

IRVINE, Calif. and LAS VEGAS – Feb. 10, 2026 – Every day, trucks pick up and drop off trailers as freight moves through yards, terminals, and customer locations. Truck drivers are often asked to confirm which trailer they are pulling, usually by selecting it on a screen before moving on. When that step is rushed, skipped, or entered incorrectly, the consequences extend far beyond the cab. The wrong information can affect safety records, inspections, dispatch decisions, load security, and even when a company can bill for the work. That seems like a small moment at hookup can quickly create costly problems across an entire fleet. 

Phillips Connect TrailerID addresses that problem by identifying the connected trailer at the moment it is hooked. Instead of relying on manual input, Trailer ID confirms the trailer connection automatically and shares that information across the systems fleets already use. The result is a simpler experience for drivers and more reliable information for the teams responsible for keeping freight moving. 

“Accurate trailer identification affects nearly every part of a fleet’s operation,” said Mark Wallin, General Manager and Senior Vice President of Product at Phillips Connect. “With TrailerID, logs stay cleaner, jobs line up with what actually happened, trailers are easier to account for, and billing is easier to start and reconcile. TrailerID removes guesswork and gives fleet teams a shared view of what’s really happening with their trailers.” 

For fleets, that same automatic trailer identification carries through to compliance activities like Hours-of-Service logging and trailer inspections. When the correct trailer is already reflected in the system, logs and inspection records stay accurate without relying on manual entry, reducing errors, rework, and the risk of compliance issues while keeping the driver experience simple. 

TrailerID also helps fleets make sure that the trailer that was planned for a job is the one that actually left the yard. When the system confirms which trailer moved, teams can quickly spot mismatches, prevent mispulls, and understand which trailers are available or sitting idle. Dispatch and planning no longer have to guess or chase down updates to know what happened. 

The same clarity carries through to security and billing. Knowing exactly when and where a trailer was dropped helps protect the load and reduce the risk of theft or fraud. It also allows billing to start based on a verified event, instead of waiting on manual confirmation or follow-up. 

TrailerID is built on a vertically integrated hardware and software platform that delivers more dependable results than methods based solely on GPS or proximity. Trailer connections are detected through the physical tractor-trailer connection using the T/T Pair connector and then validated through Phillips Connect software. Drivers experience this automatically in the cab through DriverAssist, while operations teams see the same events through Connect1 in the back office. The result is a clear record of what actually happened rather than an estimate or assumption. 

For drivers, TrailerID removes one more manual step from an already complex in-cab experience. Trailer identification happens automatically, reducing screens, selections, and the chance for error. That same pairing information is immediately available to dispatch, safety, operations, and billing teams. 

TrailerID is available through multiple in-cab environments. Fleets can access TrailerID on the DriverAssist app directly through Phillips Connect or via integrations with leading in-cab platforms, including Platform Science and Geotab’s OrderNow Marketplace.  

About Phillips Connect 

Phillips Connect smart trailer technologies help the world’s largest fleets improve operations, safety and efficiency. The Phillips Connect platform of software sensors, cameras and telematics gateway innovations provide fleet managers and operational leads with real-time visibility into their trailers’ location, tire, brakes, cargo and door statuses, and more, saving customers time and money. Headquartered in Irvine, California, Phillips Connect is part of the Phillips family of companies, celebrating nearly a century of delivering innovative, reliable solutions that keep the transportation industry moving. For more information, visit www.phillips-connect.com. 

The post Phillips Connect TrailerID Turns Trailer Pairing into an Operational Advantage appeared first on Phillips Connect.

In this on-demand session, you’ll learn how fleets are using AssetTrac to gain real-time insights, reduce losses, and maximize utilization across every location.

Simple. Scalable. Built for the Real World.

AssetTrac is a high-performance, peel-and-stick GPS tracker that gives you total visibility from the yard to the most remote job sites. Just stick it on — no wiring, no downtime.

Now Available in the Geotab Marketplace

Through our partnership with Geotab, fleets can now access AssetTrac directly within the Geotab ecosystem for seamless visibility and control over every piece of equipment.

The post Simplify Asset Tracking with Phillips Connect and Geotab appeared first on Phillips Connect.

With real-time trailer visibility from Phillips Connect, those headaches go away. 

Before dispatching a truck, operations teams can now check whether the trailer is loaded, staged, or still in a dock. They can see if the doors are open or closed. That simple level of insight turns guesswork into informed planning. If a load isn’t ready, they can redirect that driver and avoid turning a hook into a live load. 

On the back end, drop-and-hook visibility prevents drivers from getting stranded without a return trailer. If all empties are in use, dispatch knows before the driver even arrives. That gives the carrier leverage. Instead of deadheading away, they can notify the shipper they won’t pick up until an empty is available, which is a smart use of capacity in a tight market. 

Just as importantly, trailer visibility delivers the kind of data carriers can bill against. Instead of relying on manual input or vague time stamps, you can track exactly how long each trailer sat idle, whether it was unloaded on time, and when it became available again. That means fewer disputes and more accurate detention charges, and directly improving revenue per trailer. 

In today’s freight market, knowing what’s happening inside the trailer and across the yard isn’t a nice-to-have. It’s a competitive advantage. 

The post Detention Is a Trailer Problem, Not Just a Driver Problem appeared first on Phillips Connect.

SC Ports will use Phillips Connect’s StealthNet™ GPS tracking technology on its SMART Pool™ chassis fleet to maximize efficiencies and gain insight into its supply chain. StealthNet monitors chassis for location, mileage, and power usage.

“SC Ports is launching its SMART Pool to enhance the reliability, safety, quality and availability of chassis equipment to support supply chain fluidity,” SC Ports CEO Barbara Melvin said. “We are excited to utilize Phillips Connect’s GPS technology to optimize the performance of our new SMART Pool. The enhanced visibility it provides will further support the efficient movement of cargo.”

StealthNet is a sturdy, waterproof, high-performance tracking gateway that installs in 10 minutes or less, with two charging options and a 10-year rechargeable battery capable of operating without recharge for up to six months.

“After reviewing several vendors, we felt very confident partnering with Phillips Connect for our new SMART Pool,” SC Ports’ Chassis Pool Director James Caudill said. “We were impressed with the quality, capability and reliability of its technology. The quick installation is beneficial to operations, and the fleet visibility will help maintain fluidity in the supply chain.”

“The StealthNet solution SC Ports has chosen for its new chassis pool will have very robust capabilities out of the gate, but also has great potential to grow with them,” said Phillips Connect’s Director of Sales Engineering, Cliff Creech. “Phillips Connect is proud to have been chosen as SC Ports’ telematics provider for its new chassis pool.”

(Photo/SCPA/English Purcell)

The post South Carolina Ports Chooses Phillips Connect as Telematics Provider for New Chassis Pool appeared first on Phillips Connect.